Heavy-duty plastic. Dimensions: 6" X 2-3/4". Green.

For pulling pots, anchors or anything heavy with ease. A compact two-part design that works great on small boats. Pulley may be stowed away when not in use. Recommended for non-commercial, single-trap use. Sheave is 1" wide. Maximum rope size: 1/2". Weight: 1.28 lbs.

For pulling pots, anchors or anything heavy with ease. A compact design that works great on small boats. May also be mounted to any flat surface. Recommended for non-commercial, single-trap use. Mounts to rails 3/4" - 1-1/4" diameter. Sheave is 1" wide. Maximum rope size: 1/2". Weight: 1.28 lbs.

Mounts to 1" - 1.35" round rails.
For vertical or horizontal rails.
Side mount or pedestal mount.
Uses all stainless hardware.

Clam-shell design keeps your rod secure. Accepts rods up to 1-1/2" diameter. Fiber-reinforced construction for strength. Side-mounted, fully adjustable.

Vertical Flush Mount Chrome plated bronze flange Stainless steel tube Hard black plastic line Integral flip-up cap Drain Bib: Yes Weight: 1.58 lbs

Heavy-duty fishing rod holder. Side mounted with four screws. Chrome plated brass and bronze construction. Dimensions: 2" X 9". Weight: 2.04 lbs.

Fits 3/4" to 1" diameter rails Polished stainless steel tube - Chrome plated zinc alloy Hard black plastic liner - Clamp-on eliminates drilling Mounts on vertical or horizontal rails Adjustable as supplied for 7/8" to 1" rails Weight: 1.4 lb

Rail mounted. Solid, single-piece construction. Injection-molded polypropylene. Dimensions: 20" X 12-5/8" X 2".

Polypropylene construction.
Molded-in standoff on back, allowing easy direct mounting.
Length: 11-11/16".
Diameter: 1-3/4".
Color: White.
Display packaged.

Soft black flange gasket with integral flip-up cap Soft black lip Replacement or upgrade for older holders Weight: .1875 lb

Injection molded polypropylene Length: 11-11/16" Color: White Weight: .22 lb

Cut-outs for left or right hand spinning reels. Fits spinning, casting, and trolling rods. Holds rod with up to 1.2" handles. 2/3 smaller than the original Advantage Rod Holder. Has cut-outs to accept rods with finger (trigger) grips. Virtually eliminates the struggle to get your rod out. Mounting bases are auto-locking and holds gear securely.

Designed for single motion hook setting and rod removal. 12-position, 360° adjustable yoke. Open faced tube. Revolving retaining ring to lock rod in place. ABS plastic side mount is included. Rail mount adapter and flush mount are sold separately.

Works in conjunction with side mount. For 7/8" and 1" rails.

Used on vertical, flat surfaces May be used with a rail mount adapter.

Fish-On! rod holder mount. Add an extra rod mounting location anywhere you want. Attaches to any flat horizontal surface. Designed to work with all Fish-On! products. Dimensions: 5" X 7-1/2" X 2".

Fish-On! locking surface-mounted rod holder unit. Installs on a horizontal surface with only small holes. Raises the rod holder 2 inches above the gunnels. Product size: 2" X 4" X 2".

Tempress rail adapter kit. Works with side mounts, net/gaff holders and triple-mounts. Useable on any 7/8" or 1" rail. Includes all necessary hardware for mounting. Weight: .15 lb.

Standard 12-position Fish-On! side mount. Easily attaches to most rails and flat surfaces. Mounted with four self-tapping screws (included). Works with all Fish-On! rod holders and accessories. Color: Black. Weight: .3 lb.

CHrome plated zinc alloy flange Angled flush mount (appromiximately 65 degrees) Anodized aluminum tube Soft black liner Flange gasket with integral flip-up cap No drain bib Weight: 1.5 lbs

These Track Rod Holders are designed to hold fishing rods in the toughest conditions.
Can be mounted vertically or horizontally in boats and homes.
Includes two 7” pre-drilled aluminum tracks and four PVC clips.
Installs with four fasteners (included).

Self-contained lithium battery is rated for 300 hours of use Color: White.

Water-activated, submersible light.
Attracts interest from baitfish, gamefish, squid and more.
Self-contained lithium battery provides about 300 hours of use.
Attach this light on a squid jig or other deep water setups.

Color: Green.

Formed 316 stainless steel Easy adjustment with front mount adjustment screw, without having to disassemble rail mount brackets 9" length, tube dia. 1-11/16" - Fits 7/8" to 1" tubing Weight: 1.65 lb

Polished stainless steel flange Anodized aluminum tube Soft black liner Flange gasket with integral flip-up cap Weight: 1.375 lbs

A basic tube-style rod holder.
Fiber-reinforced nylon construction.
A front-end reel slot and removable gimbal pin makes fitting any rod and reel combo easy.
Fully adjustable.

Adjusts for elevation and angle. Great for fishing from boats or piers. Cradle configuration secures rod. Permits one motion hook setting and rod removal. Large swivel locking ring. Side mount included.

Rail mounted. Solid, single-piece construction. Injection-molded polypropylene. Dimensions: 30" X 12-5/8" X 2-3/8".

Very effective for catching squid.
Equipped with 12 lb. fluorocarbon leader and small snaps.
Designed to hold two or three squid jigs.
Length: 55".
Each branch is 2" from leader.
23-1/2" between each squid jig.
8" between the top branch and the swivel.

Injection molded ABS Length: 9-1/2" Color: White Cap: No Weight: .4 lb

Investment cast 316 stainless Slim line stainless steel construction with UV resistant PVC cap and full length PE liner Length: 8-5/8" Weight: 2 lbs

Investment cast 316 stainless Length: 8-5/8" Display packed Weight: 2 lbs