Moderately reactive epoxy hardener. Designed to be used with MAS epoxy resin. Gels and sets quickly enough for controlled application. Manufacturer suggests overnight cure before sanding. Low viscosity, moderate cure. Resin:hardener 2:1 mix ratio. 23 minute pot life; 4 hour set time, 2-7 day cure time. Size: 1 qt. Weight: 2 lbs.

A great low-viscosity epoxy resin, designed with artists in mind.
1:1 mix ratio, long 60 minute working time and improved UV resistance.
Developed with input of dozens of makers, artists and woodworkers.

Size: 2 quart kit.

FLAG epoxy in a handy take-along size. Small enough to keep on board, large enough for most repairs Medium body epoxy designed for fileting, laminating, gluing. Includes 4 mixing containers, 4 pairs of gloves. Size: 16 oz. FLAG resin, 8 oz. medium hardener. Weight: 1.8 lbs.

Best for repair of fiberglass and metal surfaces.
Will rebuild rotted-out areas on fenders, body sections and rocker panels.
Also used for forming special customized shapes.

Kit #370 contains:
- 1 quart polyester resin
- 11 cc liquid hardener
- 6 sq. ft. fiberglass mat
- 3" x 5' fiberglass tape
- instructions.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 gal. Weight: 8 lbs.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 qt. Weight: 2.2 lbs.

Low-viscosity resin.
Easy-flow low-drip blend of resin and reactive dilutents.
No VOCs, no blush.
Ideal for boat hull production, laminating, and bonding.
600 cps viscosity for smooth, easy wet-out laminations.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 1/2 gal.

Low-viscosity resin
Easy-flow low-drip blend of resin and reactive diluent solution.
Low VOCs, no blush.
Ideal for boat hull production, laminating, and bonding.
600 cps viscosity for smooth, easy wet-out lamination jobs.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 4 gal.

For quick and easy permanent gelcoat repairs. Strengthens, repairs and rebuilds damaged areas. Repair meterial cures to glass hardness in one hour. Features special release film and no-run polyester gel. Includes: - Polyester gel coat paste - Hardener - Color additives - Release film - Mixing sticks - Blending chart and instructions. Size: 4 oz.

Premium Marine Resin Pint 6/ Perfect no-run/ no-sag Polyester resin for marine repairs. Repairs all boat surfaces. Protects against moisture damage. Use with Sea-Glass fiberglass fabrics & Evercoat coloring agents. Liquid hardener included.

Perfect no-run/no-sag polyester resin for marine repairs Repairs all boat surfaces Protects against moisture damage Use with Sea-Glass fiberglass fabrics and Evercoat coloring agents Liquid hardener included Weight: 10 lbs

Perfect no-run/no-sag polyester resin for marine repairs Repairs all boat surfaces Protects against moisture damage Use with Sea-Glass fiberglass fabrics and Evercoat coloring agents Liquid hardener included Weight: 2.83 lbs

Quality laminating resin for base coat applications This resin is not a finish coat This air-inhibited resin remains tacky to hold fiberglass fabric in place on vertical surfaces. Does not require sanding between coats Excellent for saturating fiberglass fabrics Liquid hardener is included Weight: 10.5 lbs

Methyl ethyl ketone peroxide and cumyl hydroperoxide. A liquid polymerization initiator for curing resin. For use with unsaturated polyester and vinyl ester resins. Size: 4 oz.

Makes easy, permanent color-matched repairs. For use with gelcoat and fiberglass hulls and decks. Simple to use: fills in cracks, scratches, and chips. Try it in bathtubs, shower stalls, and hot tubs. Blends with resin colorants for color matching. Size: 1/2 oz.

Repairs fiberglass scratches. For boats, bathtubs, shower stalls, hot tubs and more. A permanent repair for cracks, scratches, chips. Single-part formula does not need a catalyst. Color: White. Size: 1/2 oz.

Highest quality ISO NPG marine finish gel coat to repair or replace old gel coat Cures to a permanent high-gloss, hard finish and does not require mold release to attain a fully-cured surface Non-run, non-sag formula, flexible polyester resins, resilient and tough Tint with Evercoat coloring agents to desired color Reduce with acetone for sprayers Weight: 2.67 lbs

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 1.33 lb

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 2.67 lbs

A thixotropic, glycol-isophthalic polyester gelcoat. For spray applications. Designed for pigmented, medium to highly chromatic colors. Color: Black. Size: 1 qt.

GelMagic epoxy, designed for use with porous materials.
Simple and easy to measure (mixes in a 2:1 ratio).
Works great on overhead and vertical surfaces.
Designed for high peel strength.
Resistant to embrittlement, and impact and creep resistant.
May be post-cured up to 140º F for even greater performance.
Size: 1.5 pint kit.

A thixotropic, glycol-isophthalic polyester gelcoat. For spray applications. Designed for pigmented, medium to highly chromatic colors. Color: White. Size: 1 gal.

"5-to-1" hardener, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 pt.

"5-to-1" hardener, designed for bonding and coating wood Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 qt.

A strong, medium-body resin Designed for filleting, laminating, and gluing. Ideal for general-purpose gluing applications where wet-out of fiberglass is not a consideration. Perfect for all your filleting and fairing needs. The medium viscosity works well with fillers. gluing slurries and filleting systems are required. Size: 1/2 gal. Weight: 5 lbs.

"5-to-1" hardener, designed for bonding and coating wood Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 qt.

Rapid-cure epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for bonding jobs, spot filling, and fairing. Gels and sets quickly at room temperature. Add to Slow or Medium hardener for custom cure times. Low viscosity, fast cure, very strong. Resin:hardener 2:1 mix ratio. 7 minute pot life; 2 hour set time, 2-5 day cure time. Size: 1 ga. Weight: 8 lbs.

Rapid-cure epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for bonding jobs, spot filling, and fairing. Gels and sets quickly at room temperature. Add to Slow or Medium hardener for custom cure times. Low viscosity, fast cure, very strong. Resin:hardener 2:1 mix ratio. 7 minute pot life; 2 hour set time, 2-5 day cure time. Size: 1 qt. Weight: 2.2 lbs.

A thixotropic, glycol-isophthalic polyester gelcoat. For spray applications. Designed for pigmented, medium to highly chromatic colors. Color: Gray. Size: 1 gal.

"5-to-1" resin, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 hardener. Size: 1 ga.

"5-to-1" resin, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 hardener. Size: 1 qt.

 

100% solid, two-component epoxy.

Formulated for deep pour casting, encapsulating, molding.

Cures to a clear, glass-like finish.

Resists scratches and yellowing.

3:1 mix ratio.

Kit consists of 1 gallon resin, 1/3 gallon hardener.

Pourable, self-leveling bar and tabletop coating.
Easy to apply and cures crystal clear.
Exceptionally tough.
Scratch resistant, waterproof, alcohol proof.
100% solids, no solvents, low odor.
Can be applied over wood, ceramic, stone, concrete and more.
Size: 1.5 pints.

Permanently repairs nicks, gouges and scratches. For use on counters, tubs, sinks, decks, hulls. Six colors help you match any color of gelcoat. Hardens in one hour Kit includes: - Colors - Polyester gel coat paste - Hardener - Release film - Blending chart and instructions.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin : hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 gal.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin:hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 pt.