CO2 cartridge for classic inflatable PFDs.
Must be paired with pins and bobbins for re-arming.
NOT a full re-arm kit.
Size: 33 grams.

Replacement bobbins for Mustang inflatable PFDs. For use with all Halkey-Roberts type automatic inflators. These bobbins dissolve in contact with water and cause the CO2 cylinder to inflate the PFD. Mustang suggests replacing bobbins every three years. For use with the following models: MC1900, MC19000HR, MD3001 MD3002, MD3031, MD3032, MD0200, MD3083, MD3084, and MD3087.

For automatic inflatable life jackets (PFDs).
Includes:
- 33 gram CO2 cartridge with Halkey-Roberts bayonet assembly
- Water soluble bobbin.
Fits Absolute Outdoors models 1334 and 1335.

24 gram CO2 cylinder.
Fitted with a with Halkey-Roberts bayonet assembly.
Water soluble bobbin.
Fits A-24 In-Sight automatic life jacket PFD - #1332.

Everything needed to re-arm a MD2010 manual inflatable PFD.
Includes:
- one 20 gram CO2 cylinder
- one ready status indicator pin.

Use only Mustang Survival re-arm kits.

Using other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.

Contains everything necessary to re-arm your automatic MD2012.
Use only Mustang Survival re-arm kits.
Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.

Includes:
- one 20 gram CO2 cylinder
- one ready status
- indicator pin
- one bobbin.

This auto hydrostatic re-arm kit contains everything necessary to re-arm your Mustang Survival auto hydrostatic inflatable.
Use only Mustang Survival re-arm kits.
Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.
Contains an auto hydrostatic inflator, which includes:
- One 24 gram CO2 cylinder/inflator body
- Inflator cap with metal pull handle
- Metal key
- Re-arming manual.
Compatible with inflatable PFD model numbers: MD5183, MD5183 BC, MD5183 KF, MD5153, MD5153BC, MD5153 KF.

Everything necessary to re-arm a Mustang Survival automatic hydrostatic inflatable.
Contains an auto hydrostatic inflator.
Includes:
- One 24 gram CO2 cylinder / inflator body
- Inflator cap with metal pull handle
- Metal key
- Re-arming instruction manual.

Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.
The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.

For inflatable model numbers: MD5283, MD5253, MD6284, and MD6254.

The 1F automatic and 3F manual inflatable re-arm kit E contains everything necessary to re-arm your inflatable.

The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.
Use only Mustang Survival re-arm kits.
Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.

Re-arm kit contains:
- One 33 gram CO2 cylinder
- One bobbin (use only with automatic inflatables)
- One re-arming instruction manual.

Note: This re-arm kit replaces discontinued re-arm kits MA7202 and MA7203.

24 gram CO2 cylinder.
Green indicator clip.
Water soluble bobbin. 1/2" thread.
Fits A/M-24 automatic/manual PFDs - #1320, #1321.

Contains everything necessary to re-arm a Mustang Survival M.I.T. 100 manual or automatic inflatable.
The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.
Use only Mustang Survival re-arm kits.
Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.
Includes:
- one 24 gram CO2 cylinder
- one bayonet assembly
- one bobbin (used for automatic PFD models only)
- one re-arming instruction manual.

For model numbers: MD2014, MD2015, MD2016, MD2017, and versions CM and T1.

Manual and automatic inflatable re-arm kit. Contains everything necessary to re-arm a Mustang inflatable.

The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.

Re-arm kit contains:
- One 33 gram CO2 cylinder
- One green inflator pin
- One automatic inflator bobbin (automatic inflatable only)
- One re-arming instruction manual.

Note: This re-arm kit replaces discontinued re-arm kits MA7170, MA7174, and MA7270.

Use only Mustang Survival re-arm kits.
Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.

For model numbers:
MD1166, MD3000, MD3001, MD3002, MD3003, MD3004,
MD3017, MD3019, MD3020, MD3010, MD3015, MD3021,
MD3025, MD3031, MD3032, and MD3091.

An auto hydrostatic re-arm kit contains everything necessary to re-arm a Mustang Survival auto hydrostatic inflatable.

The auto hydrostatic inflator cap and body should be replaced before the expiry date on the cap passes.

Use only Mustang Survival re-arm kits. Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.

Contains an auto hydrostatic inflator, which includes:
- One 33 gram C02 cylinder/inflator body
- Inflator cap with plastic pull handle
- Metal key
- Re-arming instruction manual.

For inflatable model numbers:
MD3153 (02/LE/T3), MD3154 (02), MD3155, MD3157, MD3183 (02/GS/LE/T2/T3), MD3184 (02) and MD3188.

Contains:
- One 33 gram cylinder with bayonet tip
- One water-sensitive bobbin
- Rearming instructions. Kit #0927.